Automatic Time Synchronization
Whether the clock set itself automatically or whether you set the clock manually the WWVB receiver will automatically switch ‘On’for 10 minutes at 1 AM, 2 AM, 3 AM, 4 AM, and 5 AM every day and listen for the WWVB signal. During this time between midnight and dawn the interference level is reduced and the WWVB signal can be received clearly even in the fringe reception areas. The clock will automatically resynchronize itself with the U.S. Atomic Clock time signal.
Note: If the radio is ‘On’during this time period the WWVB receiver will not turn ‘On’.
Seconds Counter
If you need to momentarily view the seconds display depress the TIME/SECONDS button. The month/date display changes to a seconds counter for as long as the button is depressed.
SETTING THE WAKE UP TIMES
Your Atomic Clock Radio has two separate wake up alarms that can be set and used independently. In addition the Alarm Mode selector allows you to set either or both alarms for Week Days only, Week Ends only, or Every Day operation.
The procedure for setting the wake up times is the same for both alarms.
1.) Depress the ALM 1 or ALM 2 button. The display will change from the current time to the Alarm 1 or Alarm 2 wake up time. The Day indicators will show which mode is selected: Week Days only; Week Ends only; or Every Day.
2.) Continue pressing the ALM 1 or ALM 2 buttons and press the “+” or
3.) To change the Alarm Mode setting depress either the ALM 1 or ALM 2 buttons and press the ALARM MODE button repeatedly until the day indicators show the desired mode: Monday through Friday only; Saturday and Sunday only; or All 7 days.
After adjusting the wake up times you may recheck the settings at any time by simply pressing the ALM 1 or ALM 2 button. The display will change from current time to wake up time and the day indicators will show which alarm mode has been selected.
13
CKA1100_drafts052102.p6513
21/5/2002, 15:19
