CLOCK SETTING
1.) Switch the unit to Standby mode by pressing the POWER 
button.
2.) Press the PROG / MEMORY button. The hour digits will flash in the display.
AM 
莤莤响
3.) Use the 
/ 
buttons to set the required hour. Be sure to set correctly for AM or PM.
4.) Press the PROG / MEMORY button again. The Hour is now set and the Minute digits start to flash in the display.
PM 莤莤响
5.) Use the 
/ 
buttons to set the required minute.
6.) Press the PROG / MEMORY button again. The Minutes are now set and the clock will start.
PM 莤莤响
NOTE:
•Clock time is only retained while the unit is plugged into the AC outlet. In the event of a power failure the clock will need to be reset when the power supply resumes.
•Clock time is only shown when unit is in Standby mode.
10
ES27_ib_drafts.p65 | 10 |
19/3/2002, 16:09
