DISC PLAY
1.) Insert a CD as described in the previous section and close the disc compartment.
2.) The display will then show the total number of tracks and total play time.
3.) Press the PLAY/PAUSE 
button. Disc play will begin from the start of the first track of the disc.
POP |
| 1 |
| 2 | 3 4 |
|
|
5
6 
7 
8
9 
10 
OVER
TRACK
莤莤响
4.) As each track on the CD disc is played, the corresponding track number will flash in the Calendar display. The “OVER”indicator will appear if the disc in the player contains more than 10 tracks.
POP | 1 | 2 | 3 | 4 |
| 5 | 6 | 7 | 8 |
| 9 | 10 |
|
|
| OVER |
|
TRACK
莤莤响
CALENDAR DISPLAY
5.) A particular track can be selected using either of the CD Skip 
/ 
buttons.
If this is done before pressing the PLAY/PAUSE 
button, disc play will start
with the selected track when the PLAY/PAUSE 
button is pressed.
6.) At the end of the disc, the unit will switch to stop mode.
NOTES:
•If the disc is deeply scratched, or too dirty, disc play may not start.
•If the disc is inserted incorrectly, or the disc is damaged the “no disc”indicator will flash on display.
POP
12
ES27_ib_drafts.p65 | 12 |
19/3/2002, 16:09
