5.) If the REPEAT / MEMORY UP button is pressed once more, the “REPEAT” indicator will disappear and, repeat play will end. Normal disc play will resume from that point.
6.) When the last track has finished playing, the CD player will then Stop.
PROGRAMMED DISC PLAY
•It is possible to program the tracks you wish to play in a sequence of your choice. It is not possible to enter program a disc during playback. Press the STOP 
button first, then follow the instructions below.
•It is easier to use the remote control for the following settings, however you may also use the controls on the main unit if desired.
ENTERING A PROGRAM
1.) Press the PROG / MEMORY button. “TRACK MEMORY” flashes and
POP
TRACK MEMORY
2.) Select the first desired track using the Forward 
and Reverse 
Skip buttons.
3.) Press the PROG / MEMORY button. The first program selection is now stored in the program memory. The display will now show
POP
TRACK MEMORY
4.) Select the next desired track using the Forward 
and Reverse 
Skip Buttons.
5.) Press the PROG / MEMORY button. Continue entering tracks in this way until all the desired tracks are stored (up to 20 tracks).
NOTES:
•If the PLAY / PAUSE 
button is pressed before the PROG / MEMORY button is pressed to store a track, the track will not be programmed, and the disc will start playing from the first selected track.
16
ES27_ib_drafts.p65 | 16 |
19/3/2002, 16:10
