Emerson ES830 owner manual Stereo Headphone Jack, MUTE Button

Models: ES830

1 34
Download 34 pages 12.13 Kb
Page 15
Image 15
MUTE Button

MUTE Button

Press the MUTE button on the front panel or the remote control to shut off the speakers temporarily, for example, to answer the telephone.

The sound stops and the MUTE indicator appears in the display.

Press the MUTE button again to cancel the mute function and restore the sound. The MUTE indicator disappears.

The mute function will also be canceled automatically by pressing the VOL. DOWN ( ) or VOL. UP (+) buttons.

Stereo Headphone Jack

This system includes a stereo PHONES jack on the front panel of the main unit. You may connect a set of stereo headphones, not included, to this jack for private listening without disturbing others.

The main speakers are automatically shut off when headphones are connected to the PHONES jack. Make sure that the plug from your headphones is fully inserted into the headphone jack. If the plug is not fully inserted the sound may be intermittent, or you may only hear sound from one side of the headphones.

IMPORTANT: To prevent hearing damage always set the volume control to a low level before you connect the headphones. Then connect the headphones, put them on, and very gradually increase the volume to a comfortable listening level. Remember that CDs may contain both very soft and very loud passages. Adjust the volume to a comfortable level using a louder passage, so that you always know what the maximum level will be.

1 4

ES830_012005.p65

14

20/1/2005, 11:15

Page 15
Image 15
Emerson ES830 owner manual Stereo Headphone Jack, MUTE Button