PREPARATION FOR USE
Unpacking and Set Up
•This carton contains the main unit, two speakers, and a remote control handset. Carefully remove all the components from the carton and remove all packing materials form the components. Make sure nothing is accidentally discarded with the packing materials.
•Save the carton and packing materials, if possible, in the unlikely event that this unit ever needs to be returned for service. Using the original carton and packing material is the only way to properly protect the unit from shipping damage.
•Remove any descriptive stickers or labels from the front panel of the main unit. Do not remove any labels or stickers that may be affixed to the back panel of the main unit or the speakers.
•This system was shipped with a “dummy CD” transit protection card in CD player. The card was inserted to prevent the CD player mechanisms from moving during shipping and handling. It must be removed and discarded before you can load your own CD. Press the 
OPEN/CLOSE position to open the CD door. Remove the “dummy CD” and discard it. Then press the 
OPEN/ CLOSE position again to close the CD door.
•Unwind the AC power cord on the back of the main unit and extend it to its full length.
•Unwind the FM lead wire antenna on the back of the main unit and extend it to its full length.
•Unwind the speaker cables on the backs of the speakers and extend them to their full length.
4
ES830_012005.p65 | 4 |
20/1/2005, 11:15
