Emerson HK25 user service Playing Cassette Tapes

HK25 O/M.QXD 8/21/01 3:01 PM Page 10

PLAYING CASSETTE TAPES

1

2

3

Set the VOLUME Control to a low setting.

Slide the FUNCTION Switch to the TAPE position.

Open the Cassette Control Cover to expose the cassette controls

and press the Stop/Eject ( ) Button to open the Cassette Door.

4	Open surface side
	Emptiest reel

5
3	2
	1
	￿

6	2
1	3
￿

Insert a pre-recorded cassette into	Press the cassette Play (➛ )
the slots in the Cassette Door with	Button ❶ to begin playback.
the open end facing up and the full	Adjust the VOLUME ❷ and
reel on the right side. Close the	STEREO-WIDE ❸ Controls as
cassette door.	desired.

To advance or rewind the tape rapidly, press either the cassette Fast Forward (➛➛) ❶ or Rewind (❿❿) ❷ buttons. When you reach the desired point, press the cassette Play (➛) Button ❸ to resume normal playback.

7

￿

8

9

To pause playback momentarily,

press the cassette Pause ( ) Button. The tape movement stops but the tape motor is still running.

Press the cassette Pause ( ) Button again to release Pause and resume normal playback.

To stop playback before the tape

ends, press the Stop/Eject ( ) Button, The PLAY Button is released and the tape motor shuts off.

When the tape reaches the end, the auto-stop mechanism activates, the tape PLAY Button is released and the tape motor shuts off. Press the Stop/Eject

( ) Button to open the Cassette Door and remove the tape.

10