HK25 O/M.QXD 8/21/01 3:01 PM Page 9
4 |
1 |
2 |
1 |
5 |
1 |
2 |
1 |
6 |
1 |
2 |
1 |
Press the Skip/Forward (
) or Skip/Reverse (
) Buttons ❶ to select the first track that you wish to program. Example: Track 5. When the desired track number (Example: Track 5) is flashing in the display, press the CD PROGRAM Button ❷ again. The display will briefly show Program Memory #1 and then your desired track number (Example: Track 5) will resume flashing. This confirms that Track 5 has been entered into CD Program Memory #1.
Press either the Skip/Forward (
) or Skip/Reverse ( 
) Buttons ❶ to select the next track you wish to program (Example: Track 8). When Track 8 is flashing in the display, press the PROGRAM Button ❷ again. The display will briefly show Program Memory #2 and then Track 8 will resume flashing. This confirms that Track 8 has been entered into CD Program Memory #2.
Repeat step 5, selecting a different track each time, until you have programmed up to 20 track numbers into the CD Program Memory.
7 |
|
3 | 2 |
| 1 |
After programming up to 20 tracks in the CD Program Memory, press the CD PLAY/PAUSE (❿ 
) Button ❶ to begin programmed playback. The Program indicator will begin flashing in the display and playback will begin on the first track that you programmed. The player will continue to play all of the tracks that you programmed in the order in which you programmed them. When the last programmed track has been played, the player will stop and the display will again show the total number of tracks on the disc. The Program indicator remains in the display and the program is still active. If you press the Program button and then press the CD PLAY/PAUSE button ❶ again, playback will start on the first track you programmed and will continue until all the programmed tracks have been played.To cancel the Programmed Playback mode, press the CD Door OPEN Button ❷ to open the CD Compartment Door or set the FUNCTION Switch ❸ to the RADIO or TAPE(Off) positions.
PROGRAMMED REPEAT
1 | 2 |
3 |
2 |
1 |
It is also possible to use the Program and Repeat functions together to repeat a specific program indefinitely. First, program the tracks you wish to hear in the order you wish to hear them, as described above. Then, press the REPEAT Button once. Both the Program and Repeat indicators will appear in the display.
Press the CD PLAY/PAUSE (❿ 
) Button to begin programmed repeat playback. The player will play the tracks you selected in the order in which you programmed them. When the last track in the program has been played, the entire program will begin again.
Program Repeat operation will continue indefinitely until you press the CD STOP (■) Button ❶, open the CD door or set the FUNCTION Switch ❷ to the RADIO or TAPE (Off) position.
9
