BP7280, Olympia, KF100 7/31/06 10:57 AM Page 9

How to Wire

Your Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experi- ence, have your fan installed by a licensed electrician.

!WARNING

Turning off wall switch is not suffi- cient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accor- dance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

CAUTION: To reduce the risk of electri- cal shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver.

1. Position the supply wires to the left side of the outlet box (Figure 13); position the fan wires to the right side. Partially insert the remote control receiver (flat side up) until one end rests on the hanger ball as shown in Figure 13.

NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight, including ground, and that no bare wire

is visible at the wire connectors, except for the ground wire.

2. Refer to Figure 13 and 14 and connect the receiver wires to the supply wires and the fan motor wires as follows:

a.Securely connect the green grounding wires from the hanger ball and the hanger bracket to the supply grounding conductor (this may be a bare wire or a wire with green insulation).

b.Securely connect the supply white (neutral) wire to the receiver white (AC IN N) wire.

c.Securely connect the supply black wire (hot) wire to the receiver black (AC IN

L)wire.

d.Securely connect the fan motor white wire to the receiver white (TO MOTOR

N)wire.

e.Securely connect the fan motor black wire to the receiver black (TO MOTOR

L)wire.

f.Securely connect the fan motor blue wire to the receiver blue (FOR LIGHT) wire.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire con- nectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

SUPPLY WHITE WIRE

RECEIVER WHITE

(NEUTRAL)

WIRE

 

RECEIVER

 

BLACK WIRE

SUPPLY BLACK

WIRE (HOT)

GROUND WIRE

GREEN GROUND

WIRE FROM

HANGER BALL

ANTENNA

GREEN GROUND

WIRE FROM

HANGER BRACKET

 

1-1/4" THREADED

Figure 13

STUD (2)

 

AC

I

N

N

AC IN L

FAN

BLACK

WIRE

FAN BLUE WIRE

FAN WHITE WIRE

9

RECEIVER BLACK

WIRE

RECEIVER BLUE WIRE

 

 

 

 

MOTOR

L

MOTOR

N

LIGHT

 

 

 

TO

 

 

TO

 

FOR

 

 

 

 

 

 

 

 

 

 

 

RECEIVER WHITE WIRE

Page 9
Image 9
Emerson KF100AP01, KF100OZ01, KF100DBK01 owner manual How to Wire Your Ceiling Fan, Receiver White Wire

KF100DBK01, KF100OZ01, KF100AP01 specifications

The Emerson KF100OZ01, KF100DBK01, and KF100AP01 are advanced kitchen appliances designed to enhance the culinary experience for home cooks and professional chefs alike. Each model showcases unique features, cutting-edge technologies, and user-friendly characteristics that set them apart in the market.

The KF100OZ01 is known for its sleek design and versatile functionality. It boasts an intelligent cooking system that adjusts cooking times and temperatures based on the type of food being prepared. This model features a touch-sensitive control panel that allows users to select various cooking modes, including sauté, bake, steam, and slow cook. Its stainless steel construction not only offers durability but also adds a modern aesthetic to any kitchen. Additionally, the KF100OZ01 comes equipped with a high-efficiency heating element, ensuring consistent and rapid heat distribution for perfectly cooked meals every time.

On the other hand, the KF100DBK01 is a high-capacity model designed for those who love to entertain. With a larger cooking space, it can accommodate multiple dishes simultaneously, making it perfect for family gatherings or dinner parties. This model features a programmable timer and auto shut-off function, promoting safety and convenience during meal preparation. The KF100DBK01 is also designed with an easy-to-clean non-stick coating, reducing the hassle of post-cooking cleanup. The addition of a built-in sous-vide function reflects Emerson's commitment to versatility and innovation, allowing users to achieve restaurant-quality dishes at home.

Lastly, the KF100AP01 is the ultimate multifunctional appliance that combines several cooking methods in one compact unit. It offers features such as air frying, roasting, broiling, and dehydrating, catering to diverse cooking preferences. The KF100AP01 incorporates a digital LCD display, providing users with real-time cooking information and easy navigation through its various functions. This model also emphasizes energy efficiency, utilizing advanced insulation technology to minimize heat loss and reduce energy consumption. The inclusion of a safety lock mechanism ensures that the appliance is secure during operation, adding an essential layer of protection.

Together, the Emerson KF100OZ01, KF100DBK01, and KF100AP01 models represent the pinnacle of culinary technology, blending functionality with modern design. Each appliance is tailored to meet the needs of a wide range of users, from busy families to passionate cooks, ensuring that meal preparation is both efficient and enjoyable. With their innovative features and robust construction, these appliances are set to become indispensable tools in any kitchen.