HP m1050e (PJ622AV) manual Connecting 5.1 Audio Speakers, HP Media Center PC Getting Started Guide

Connect the cables to the audio system.

4

5 Connect the front and rear speakers to the subwoofer. Refer to the speaker documentation.

6 Turn on the PC.

7 Plug in the speaker system power.

8 Turn on the speaker system.

9 After the speakers are connected to the PC, configure the audio software for sound output for your PC model:

■3 Connector: See “Configuring Audio Output with Multi-channel Sound Manager” on page 48.

■6 Connector: See “Configuring Audio Output with Sound Effect Manager” on page 51.

■Sound Card: See “Configuring Audio Output with a Sound Card” on page 53.

The following diagram shows a typical 4.1 audio installation:

OUTIN

n

3 is Three Connector

6 is Six Connector

S is Sound Card

Connecting 5.1 Audio Speakers

To connect two front speakers, two rear speakers, a center speaker, and a subwoofer for six-channel

(5.1 speaker) output:

1 Turn off the PC.

. 2 Connect the front speaker cable to the lime green audio line out connector that matches the back of your PC.

3 OUT 6 S

3 Connect the rear speaker cable to the black connector that matches the back of your PC.

3 IN 6 S

■For 3 Connector systems, the blue audio line in connector functions as a rear line out when a multichannel audio configuration is activated.

40 HP Media Center PC Getting Started Guide