HP m1050y (PJ720AV), m1299a Resolving Sound Issues, Selecting recording devices, Connector only

Selecting recording devices

(6 Connector only)

To select a sound recording device:

1 Click Start on the taskbar.

2 Choose Control Panel.

3 Click Sounds and Audio Devices (or Sounds, Speech and Audio Devices). The Sounds and Audio Devices

window opens.

4 Click the Audio tab. The window opens.

5 In Sound Recording, select a recording device, for example, Realtek HD Front Pink Jack.

6 Click OK.

7 Close the window.

Resolving Sound Issues

If you don’t have sound from your speakers, check the following:

■Check volume and mute settings. See “Adjusting the Volume” on page 55.

■Verify sound cable connections.

■Reinstall the sound card drivers by using HP Application Recovery. See “Application Recovery” in the Warranty and Support Guide.

■Reconfigure the sound software for surround sound.

■Use active, powered speakers, or speakers with an amplifier.

■Some programs may result in low volume, even when the volume knob is turned to the maximum position. If this is the case, double-click the Volume icon on the taskbar and increase volume.

Configuring Speaker and Sound Options 57