HP m1160n manual Disconnecting the TV, Ge Force FX tab disabling 1 Click the Ge Force FX xxxx tab

5 Click the OK button to save changes, and then click OK again to close the Display Properties window.

Ge Force FX tab (disabling)

1 Click the Ge Force FX xxxx tab.

2 In the area nView Modes select Single Display from the drop-down list. In the area Current display select Analog Display or Digital Display.

3 Click the Apply button.

4 When the PC image appears on the TV screen, click Yes to keep the setting. You have 15 seconds to accept this new setting before it reverts to the previous setting.

5 Click the OK button to save changes, and then click OK again to close the Display Properties window.

Displays tab (disabling)

	1 Click the Displays tab. This tab shows a
	monitor and a TV. The upper-left corner of
	each display icon is a button and a status
n
	indicator. A red corner indicates an inactive
	display; a green corner indicates an active
	display.
Your TV must be
connected to the PC to
change the display.

2 Click the upper-left corner of the TV icon so it is red, and then click the upper-left corner of the monitor icon so it is green. Click the Apply button.

3 When the PC image appears on the TV

Disconnecting the TV

1 Disable the TV option. See the previous procedure.

2 Turn off the TV and the PC.

3 Remove the video cable at the TV and the PC.

34 HP Media Center PC Getting Started Guide