HP m1050e (PJ622AV), m1299a manual To connect an HP Personal Media Drive to the PC, When your Media

To connect an HP Personal Media Drive to the PC

The HP Personal Media Drive has an automatic on and off feature. The drive turns on when it is plugged into an active USB port. If the PC is turned on with the drive connected, the drive automatically turns on. When the USB cable for the drive is not plugged in or when the USB power from the PC is turned off, the drive automatically turns off.

	1	Turn on the PC.
	2	Install the HP Personal Media Drive software
		that is included with the Drive (optional). For
n		instructions about installing and using the
		HP Personal Media Drive software, refer to
		the documentation that came with your
		HP Personal Media Drive.
When your Media	3
Center PC is in		Line up the ridges on the bottom of the drive
standby mode
		with the two slots on the side of the PC drive
(reduced power
		bay. Do not force the drive into the bay; it
state), the drive
		should slide easily into the bay.
remains turned on.
	4
		Slide the drive all the way into the drive bay
		until the drive is firmly connected to the

internal power and USB cables. When the PC is turned on, the blue power LED on the front of the drive is lit when the drive is inserted correctly.

20 HP Media Center PC Getting Started Guide