HP m1050y (PU060AV), m1299a, m1050y (PJ720AV), m1050e (PU061AV) manual Connecting 4.1 Audio Speakers

Step 8 is optional for a two-speaker setup.

8 After the speakers are connected to the PC, configure the audio software for sound output for your PC model:

■3 Connector: See “Configuring Audio Output with Multi-channel Sound Manager” on page 48.

■6 Connector: See “Configuring Audio Output with Sound Effect Manager” on page 51.

■Sound Card: See “Configuring Audio Output with a Sound Card” on page 53.

The following diagram shows a typical 2.1 audio installation:

OUT

Connecting 4.1 Audio Speakers

To connect two front speakers, two rear speakers, and a subwoofer for four-channel (4.1 speaker) output:

1 Turn off the PC.

. 2 Connect the front speaker cable to the lime green audio line out connector that matches the back of your PC.

3 OUT 6 S

3 Connect the rear speaker cable to the black connector that matches the back of your PC.

3 IN 6 S

■For 3 Connector systems, the blue audio line in connector functions as a rear line out when a multichannel audio

configuration is activated.

n

3 is Three Connector

6 is Six Connector

S is Sound Card

Configuring Speaker and Sound Options 39