HP m1050e (PU061AV) Connecting the TV Signal Source, Connecting the FM Radio Antenna, Cancel

Connecting the TV Signal Source

For information about connecting the TV signal, see “Connecting the TV Signal Source” on page 24.

Connecting the FM Radio Antenna

(Select models only)

1 Plug the FM radio antenna cable into the FM In (E) port on the back of the PC. The FM connector is found on the TV tuner card.

2 You may want to extend the ends of the cable to improve your FM radio signal reception.

R	L	S-VID	TV	FM
		IN	IN	IN

E

Connecting a Digital Video Camera to the PC

When connecting an analog camera to the PC, use	See the documentation that came with your digital
the Video and Audio In connectors on the front of	video camera.
the PC. The following instructions only apply to
digital cameras.

n

If a Digital Video Device Auto Play window appears when you connect your camera, click

Cancel.

To connect a digital video camera to the PC

1 Turn on the PC, and wait for Windows XP to start.

2 Connect the video camera transfer cable into the camera and then into an open port on the front or back of the PC. Most digital video cameras use either the FireWire (IEEE 1394) or the USB port.

3 A Found New Hardware message appears. Wait two or three minutes for Windows to make the necessary settings for the new device. When installation is complete, a message appears telling you the camera is ready to use.

18 HP Media Center PC Getting Started Guide