STANDARD ON-OFF WALL

 

SWITCH OR OPTIONAL SW115

BLACK

WALL CONTROL

5. To turn the downlight on, press and release the DN button. The light will turn on at the light intensity previously

TO

BLACK

(HOT)

120-

 

VOLT

 

SUPPLY

 

 

WHITE

 

GROUND

BLACK

WHITE

WHITE

BLACK

40-WATT CANDELABRA

PLATE

BASE BULB (2)

LIGHT

 

FITTER

selected.

6. To turn the uplight on, press and release the UP button. The light will turn on at the light intensity previously selected.

7. To vary the intensity of the light, hold the DN or UP button down until the

TWO-CONDUCTOR

CABLE (WITH

GROUND)

GREEN WIRE (GROUND)

FROM HANGER BALL AND

HANGER BRACKET

Figure 14

BLUE WHITE ORANGE

BLACK

BLUE WHITE

ORANGE

HANGER BALL

THREADED

 

NIPPLE

 

LOWER

DECORATIVE

CAP

GLASS

 

desired light intensity is reached, then release the button.

Red light should turn on when any but- ton is pressed. If the light does not come on, replace the battery.

3. Push the wires and connectors up into the outlet box while inserting the receiv- er fully into the hanger bracket. Position the antenna wire on top of the receiver.

4. Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 13).

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

FINIAL NUT

Figure 17

10. Your ceiling fan is now installed and wired to be controlled by your remote control system.

UP DN

HIGH

MED

LOWREMOTE CONTROL

TRANSMITTER

OFF

5. Lift the ceiling cover up to the threaded studs and turn until the studs protrude through the holes in the ceiling cover (Figure 15).

6. Secure the ceiling cover in place by sliding lockwashers (supplied) over the threaded studs and installing the two knurled knobs (supplied). (Figure 15). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling.

7. Screw in three 40-watt (maximum) can- delabra base round bulbs into the sock- ets in the motor housing (Figure 16).

MOTOR

HOUSING

SOCKET

Operating Your

Ceiling Fan

IMPORTANT

Fan installation must be completed, including the installation of the fan blades, before testing of the remote control.

Your remote control (Figure 18) has full control of your fan and light.

REV

®

40-WATT CANDELABRA

CEILING BASE ROUND BULB (3) COVER

Figure 16

8. Screw in two 40-watt (maximum) can- delabra base bulbs into the light fitter sockets (Figure 17).

1. Restore electrical power to the outlet box by turning the electricity on at the service panel.

2. To set the desired fan speed, press the HIGH, MED, or LOW buttons to oper- ate your fan on high, medium, or low speed.

3. To turn your fan off, press the OFF button.

Figure 18

Installation of

Storage Bracket

A storage bracket is supplied with the remote control for holding the transmitter

THREADED STUD (2)

Figure 15

LOCKWASHER (2)

KNURLED

KNOB (2)

9. Place the lower glass over the thread- ed nipple and seat the glass in the light fitter adapter (Figure 17). Position the decorative cap over the threaded nip- ple and then securely install the finial nut.

4. To change the airflow direction of the fan blades, press the REV button. The direction the fan blades turn will change each time the REV button is pressed.

when not in use. If you desire to use the bracket, use the two screws (supplied) and install it on a wall that is away from excess heat or humidity.

10

11

Page 5 Page 7
Page 6
Image 6
Emerson KF140TZ00 owner manual Operating Your Ceiling Fan, Installation Storage Bracket
Page 5 Page 7

KF140TZ00 specifications

The Emerson KF140TZ00 is a versatile and highly efficient refrigeration solution designed for various commercial and industrial applications. This model stands out due to its innovative technologies and robust characteristics, making it a reliable choice for businesses that require consistent performance in temperature control.

One of the key features of the KF140TZ00 is its advanced compressor technology. Equipped with a highly efficient scroll compressor, this unit minimizes energy consumption while maximizing cooling performance. The compressor design contributes to reduced noise levels and extended reliability, ensuring that it operates quietly and efficiently even under heavy loads.

The KF140TZ00 also incorporates state-of-the-art electronic controls, allowing for precise temperature management and real-time monitoring. These controls enable users to easily set and adjust temperature settings according to their specific needs. Furthermore, the unit is equipped with a user-friendly digital display that provides valuable information at a glance, enhancing usability and operational convenience.

To ensure optimal performance, the KF140TZ00 features a robust refrigeration system that includes high-quality evaporators and condensers. This design maximizes heat exchange efficiency, resulting in faster cooling times and lower energy costs. The unit's enhanced heat exchange capabilities also help in maintaining stable temperatures within the refrigerated space, which is essential for preserving perishable items.

Durability is another notable characteristic of the KF140TZ00. Constructed with high-grade materials, this refrigeration solution is built to withstand the rigors of demanding environments. Its corrosion-resistant exterior ensures longevity, while the sturdy internal components are designed for reliable operation over extended periods.

In terms of flexibility, the KF140TZ00 offers a range of configurations and customization options. This adaptability allows it to seamlessly integrate into various commercial setups, whether as a standalone unit or part of a larger system. Businesses can choose from multiple sizes and capacities to find the perfect fit for their refrigeration needs.

Eco-friendliness is also at the forefront of the KF140TZ00's design. Operating with environmentally friendly refrigerants, it aligns with modern sustainability goals while adhering to strict regulatory standards. This makes it an excellent choice for businesses looking to reduce their carbon footprint while maintaining high operational efficiency.

In summary, the Emerson KF140TZ00 combines advanced technology, robust construction, and user-friendly features, making it a top choice for businesses seeking reliable refrigeration solutions. Its efficiency, durability, and flexibility address the diverse challenges faced in commercial refrigeration today, ensuring that it meets the needs of various industries reliably.
Top Page Image Contents