Emerson MS7625 owner manual Playing Compact Discs, Normal Playback, Cd Pause Control

PLAYING COMPACT DISCS

NORMAL PLAYBACK

1.Press the POWER button to turn the unit ‘On’. The POWER LED indicator comes on.

2.Set the Function selector to CD. Two dashes “– –” appear in the CD display. This indicates that there is no disc in the player, or that the player cannot read the disc.

3.Press the CD door OPEN button.

4.Place a CD on the center spindle with the printed label side facing up and close the CD door.

5.The player will read the Table of Contents on the disc and the display will show the total number of tracks on the disc.

6.Press the CD PLAY/PAUSE button. Playback will begin on Track 1. The display shows the number of the track being played and the Play/Pause LED Indicator “Dot” comes on.

7.Adjust the VOLUME control, as desired.

8.After the last track has been played, the disc stops and the display again shows the total number of tracks on the disc. The LED Play/Pause Indicator “Dot” goes off.

To stop playback before the disc ends, press the STOP button. The disc stops immediately and the display shows the total number of tracks on the disc.

CD PAUSE CONTROL

To stop CD playback temporarily, press the PLAY/PAUSE button again during playback. The sound stops and the Play/Pause Indicator “Dot”, which follows the track number, flashes to indicate you are in Pause mode. However, the disc

continues to spin. Press the PLAY/PAUSE button once more to cancel Pause and resume playback. The sound returns and the Play/Pause Indicator stops flashing.

7

穥譠 齇 ╛

韗曚蠖鞥縏莥颸钀