PROGRAMMED PLAYBACK
This feature allows you to program up to 19 tracks on a CD to play in any order you desire. You can program the player to skip the tracks you do not like and to repeat the tracks you do like.
Note: The CD player must be in the Stop mode in order to enter a program in the Memory.
1.If the disc is playing, press the STOP 
button so that the total number of tracks appears on the display.
2.Press the PROGRAM button once. The
PROGRAM LED Indicator begins to flash, and a flashing ‘Zero’ “0” appears in the display.
PROGRAM
3. Press either the Skip Forward 
or
Reverse 
button to select the first track you wish to program.
Example: Track # 7.
The selected track number flashes in the display.
4.Press the PROGRAM button again to enter the selected track number in the program Memory. The track number disappears and the flashing ‘Zero’ “0” returns.
5.Repeat Steps 3 and 4 to continue entering tracks in the program Memory. You may program tracks to play more than once, if desired. You can program up to 19 tracks total.
PROGRAM
PROGRAM
6.When you have finished entering tracks in the program memory, press the
PLAY/PAUSE 
button to begin programmed playback. The display will show the track number of the first track you entered and playback will begin on that track. The PROGRAM LED Indicator continues flashing until all the programmed tracks have played. When the last track has played, the player stops, the PROGRAM LED Indicator goes ‘Off’, and the display again shows the total number of tracks on the disc.
9
穥譠 | 齇 | 騌 |
韗曚蠖鞥縏莥颸钀
