Emerson MS9600 OPERATING INSTRUCTIONS, SOUND CONTROLS, VOLUME, EQUALIZER, BASS BOOST, “00” (minimum), “63” (maximum)

OPERATING INSTRUCTIONS

SOUND CONTROLS

VOLUME

Press the VOLUME UP or DN (Down) buttons on the front panel, or on the remote control to increase or decrease the volume level. The volume level indicator appears in the display while the volume is being adjusted. The range is from “00” (minimum) to “63” (maximum). The system memory remembers the volume level when the power is shut off and automatically returns to the same level when the power is switched on again.

EQUALIZER

The electronic equalizer allows you to adjust the tone settings for the most popular types of music such as POP, ROCK, JAZZ, or CLASSIC. Or you may shut the equalizer off and listen to your music with the tone controls in their “flat” settings (0db bass and 0db treble).

Press the EQ button on the front panel or on the remote control repeatedly to select the desired EQ setting. The EQ button on the front panel lights when the EQ is ‘On’and the desired setting appears in the display. If the EQ button is not lighted and no indicator appears in the display the equalizer is in the “flat” (Off) setting.

The system memory remembers the EQ setting when the power is shut ‘Off’and automatically returns to the same setting when the power is switched ‘On’again.

BASS BOOST

Press the BBS (Bass Boost) button on the front panel or on the remote control to enhance the bass response. The BBS button on the front panel lights when Bass Boost is ‘On’and the “BBS” indicator appears in the display.

Use Bass Boost when you are listening at low volume levels where the bass tends to disappear. If you are listening to music with heavy bass at high volume with the EQ set to “ROCK” and the BBS ‘On’, you may experience some distortion. If this occurs, switch the Bass Boost ‘Off’, switch the EQ ‘off’, or reduce the volume level.

13

MS9600_ib_0313.p65 13 25/3/2002, 15:23