ANTENNA INFORMATION

FM

This unit has an external lead wire FM antenna permanently attached to the back of the main cabinet. Unwrap this antenna wire, extend it to its full length, and allow it to hang down from the back of the set. In some cases you may have to vary the direction of this antenna until you find the position that provides the best reception, and then use a small piece of tape to secure the antenna in that position.

PLACE THE SCREW IN THIS

STORAGE HOLE FOR FUTURE USE.

IMPORTANT!

BEFORE TURNING POWER ON, USE A COIN OR FLAT-BLADE SCREW DRIVER TO REMOVE THIS SCREW

 

e

 

v

em

o

 

R

FM WIRE ANTENNA

AM

This system has a built in AM ferrite bar antenna. You may have to vary the position and direction of this main unit until you find the position that provides the clearest reception for each of your favorite AM stations.

7

MS9600_ib_0313.p65

7

 

25/3/2002, 15:23