PLACEMENT

Place the unit on a stable, level table, shelf or stand convenient to an AC outlet.

The unit should not be exposed to direct sunlight or sources of excess heat, moisture, dust, vibration, or humidity.

The speakers may be positioned along side the main unit, or separated as far as the cords will allow for maximum stereo separation. You should maintain a gap of at least one inch between the main unit and the speakers to prevent any skipping of the CD player when the unit operated at high volume.

SPEAKER CONNECTION

Connect each speaker to the corresponding speaker jack on the back panel of the main unit. Make sure that the left speaker is connected to the left speaker jack and the right speaker to the right speaker jack.

PLACE THE SCREW IN THIS

STORAGE HOLE FOR FUTURE USE.

IMPORTANT!

BEFORE TURNING POWER ON, USE A COIN OR FLAT-BLADE SCREW DRIVER TO REMOVE THIS SCREW

 

e

em

ov

 

R

5

MS9600_ib_0313.p65

5

 

25/3/2002, 15:23