5.1 Analyzer Module Setup

5.1.16 Temperature Measurement

Main Menu — Analyzer and I/O-module expert configuration

 

 

↓

 

 

Analyzer module setup

 

 

↓ [2nd menu page via F5 (More...)]

 

 

Temperature measurement

 

 

↓

 

 

 

 

 

 

 

 

 

TAG

95.00 ppm

 

 

-- Temperature Measurement --

 

 

 

 

 

Unit:

F

 

 

 

 

 

Temperature measurement is:

 

Valid

Temperature:

 

 

77.0 F

Measure

 

 

Back...

 

F1

F2

F3

F4

F5

In the menu "Temperature Measurement" you can set up the temperature unit for the current channel of an MLT analyzer or analyzer module. In the last line of this menu you will find the actual temperature of the channel selected.

Temperature unit setup:

¨Press the 8 -key or the → -key to select the variable.

¨Select the unit with the − -key or the ↓ -key. Options: °C, °F

¨Confirm your adjustment with the 8 -key or cancel and go back to the last one with the F2 key.

Note:

If no temperature sensor is installed, you will find a corresponding message on the screen instead of the menu page shown above.

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

5 - 63