6.1.4 System set up

Module Binding

Main Menu — Technical level configuration

 

 

 

↓

 

 

 

System set up

 

 

 

 

↓

 

 

 

Module binding

 

 

 

 

↓

 

CLD

 

 

 

95.0 ppm

 

 

Module Binding

 

Analyzer module selected:

 

CLD

Select modules...

 

 

 

Proposed bind:

 

 

NONE

View bindings...

 

 

 

Bind selections!

 

 

 

Unbind everything!

 

 

 

HOME

ESCAPE

BIND

UNBIND

INFO

F1

F2

F3

F4

F5

In the menu "Module Binding" you can bind with the analyzer modules the following types of micro processor controlled I/O modules connected to the platform:

1)I/O module with three alarms

2)Autocal I/O

3)Syscal I/O

You can unbind all existing bindings between the analyzer module and the I/O modules if you press the F4 key (UNBIND) or if you press the ENTER key or the → -key in the line "Unbind everything!".

Module binding:

1) Select the channel you want:

¨Change to the "Main Menu" with the F1 key (HOME).

¨With the F3 key (NEXT) in the "Main Menu" you can select the analyzer module you want to bind with an I/O module:

The channel selected will appear in the tag (left above in the headline of the display).

¨Go back to the menu "Module Binding" via the menus "Technical level configuration" and "System set up":

The tag of the analyzer module selected will appear in the line "Analyzer module selected".

2) Select the I/O module you want:

¨Press the ENTER key or the → -key in the line "Select modules..." to change to the submenu "Select I/O modules":

6 - 12

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98