Emerson NGA 2000, NGA2000 manual 126

6.2.1 Service Menus

Control Module Data

Main Menu — Technical level configuration

				↓
			Service menus
				↓
		Manufacturing data
				↓
		Control module data
				↓
CLD							95.0 ppm
	Control Unit Manufacturing Data
Control unit serial number:								CM1
Manufacturing date code:						16.11.1997
Hardware revision number:						ACU-01/C
Software revision number:						3
Revision notes...
User tag number:					NGA Control module
HOME	ESCAPE						INFO
F1	F2	F3	F4		F5

In the menu "Control Unit Manufacturing Data" you will find the hardware and the software revision number and the serial number of the control module.

The control module data in the first four lines are set up by the manufacturer. It is only necessary to change the data if something as the software revision number will change. Note: If you have questions about the control module give the serial number of the first line to the customer service!

You can change via the line "Revision notes..." to the corresponding submenu where you will find the current revision note of the NGA software.

In the line "User tag number" you will find the control module tag of the platform.

Set up parameters:

¨Select any line of variables or the menu line with the ↓ -key or the − -key.

¨Select the variable or change to the submenu with the ENTER key or the → -key.

¨Select any digit with the ← -key or the → -key and adjust a new value with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

6 - 18 NGA 2000

90003749X(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98