CLD

 

 

 

 

 

 

 

 

 

 

95.0 ppm

 

 

 

 

 

 

 

 

 

 

 

Record basic level security code

 

 

 

 

 

 

 

 

 

 

Press five softkeys in any order to define the code

 

 

 

 

 

 

 

 

The actual code is represented by the order in which

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

they are pressed, and shown numerically below.

 

 

 

 

 

 

 

 

 

 

Press the left arrow key when you are done.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Actual code number:

 

 

 

 

 

 

 

12345

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABCDE1

 

FGHIK2

 

LMNOP3

 

QRSTU4

 

VWXYZ5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

 

F2

 

F3

 

F4

F5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¨Put in the code you want with the function keys F1, ..., F5:

The sequence of the code numbers will appear in the line "Actual code number". Note: "1" is attached to F1, "2" to F2 and so on.

The characters displayed above the function keys are not displayed as code numbers.

Example:

·Security code you want is: 53412

·You have to press the sequence: F5 F3 F4 F1 F2

¨You can press the function keys as often you want to give in the number you want at any digit of the code. If the input of the security code is done you can go back to the menu "Record security codes" with the ← -key.

2) Enable the security code:

¨With the − -key or the ↓ -key you can change to the line:

·"Basic level security" to enable the code for the "Basic controls".

·"Expert level security" to enable the code for the "Expert controls and set up".

·"Technical level security" to enable the code for the "Technical level configuration".

¨Press the ENTER key or the → -key to select the parameter and adjust "Enabled" with the − -key or the ↓ -key. Confirm it with the ENTER key.

3) Change to a level locked by security code:

¨Go back to the "Main Menu" with F1 (HOME).

¨Try to change to the locked level via the corresponding menu line with the ENTER key or the → -key:

A menu page will appear with the invitation to enter the security code. The parameter in the line "Security code" is "Ready".

¨Enter the security code with the right sequence of function keys. The symbol "∗" will appear in the line "Security code" for each input. If the code is wrong, "Ready" will appear again in this line. Then you cannot change to the locked level. If the code is correct, the display will change automatically to the locked level after the last digit of the code is entered.

Note: If you have entered a level by security code, this level will be unlocked generally. If you want to enter this level only by security code, you have to press the F4 key (LOCK) in the "Main Menu" after each return from the specific level!

6 - 16

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98