Emerson NGA 2000, NGA2000 manual 76

5.1.11 Analyzer Module Set up

Displayed Parameters

Main Menu — Expert controls and set up

				↓
		Analyzer module set up
				↓
		Displayed parameters
				↓
CLD							95.0 ppm
		Displayed parameters
First line´s parameter:						Sample press.:
Second line´s parameter:				Detektor temperature:
Third line´s parameter:					Block temperature:
Fourth line´s parameter:						Converter temp.:
May be displayed on the appropriate
line of the single analyzer display screen.
HOME	ESCAPE						INFO
F1	F2	F3	F4		F5

In the menu "Displayed Parameters" you can determine which parameters shall be displayed in the last four lines of the single component display. These are the same parameters you can set up in the menu "Analyzer Parameter List" (see 5.1.9 p. 5-23).

Set up parameters:

¨Select any line of variables with the ↓ -key or the − -key.

¨Select the variable with the ENTER key or the → -key.

¨Select the parameter you want with the − -key or the ↓ -key.

¨Confirm the new value with the ENTER key or cancel and go back to the last value with the F2 key.

5 - 28 NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98