II) V24/RS232/485 Interface - Single Analyzers and Systems

EKEN – Write command "Device tag"

With this write command the FU will get a tag to store in the FU memory. Then it will have to be unchangeable. That means, if this part of memory will be written, the device processor will have to save it against an overwriting automatically. The setup of a new tag will only be possible by changing the processor.

The memory size for the tag is 30 ASCII characters.

Write command

EKEN Kn TAG

Data of the device tag

Read of channel n

Code

Response

EKEN 0

Error status

Code

90003752(1) [AK-Commands] 10/98

AK

2 - 89