SRON – Control command "Delay modus ON"
SROF – Control command "Delay modus OFF"
Starting this command the analyzers in a system or the single analyzer will determine measurement and integral values (averages), that will be delayed according to the delay time of the write command "EVEZ". The read commands "AKON", "AIKO" and "AIKG" will get an old value according to the synchronization time of the command "EVEZ". The analog output will get the same delay. With the command "Delay modus OFF" the integrators will start immediately and the measurement and integral values will be determined and sent out without delay.
Control command
SRON K0
SROF K0
Function associated to the whole system unit
Code
SRON Kn
SROF Kn
Function associated to channel n
Code
Response
SRON 0
SROF 0
Error status
Code
2 - 34 | AK | 90003752(1) |