II) V24/RS232/485 Interface - Single Analyzers and Systems

SSPL – Control command "Purging"

Starting this command the analyzers in a system or the single analyzer will switch on the purge gas valve and the pumps necessary for the purge gas transport.

This function can be finished either by a new command or by a defined time interval. After the purging will be over the system, the analyzer in a system or the single analyzer will change to the stand-by mode.

Control command

SSPL K0

Function associated to the whole system unit

Code

SSPL Kn

Function associated to channel n

Code

Response

SSPL 0

Error status

Code

90003752(1) [AK-Commands] 10/98

AK

2 - 35