Emerson NR290TTC Power Source, Protect Your Furniture, IMPORTANT: Raising And Lowering The Lid

AC Plug

AC Outlet

Power Source

This product is designed to operate on normal 120V 60Hz AC only. Attempting tooperate this system from any other power source may cause damage to the system,and such damage is not covered by your warranty.

NOTE:

You will note that this system is equipped with a polarized AC power plughaving one blade wider than the other. This is a safety feature.

If this plug does not fit into your existing AC

outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an out-dated non-polarized AC outlet. You should have

your outlet changed by a qualified licensed electrician.

Protect Your Furniture

This model is equipped with non-skid rubber , feet	,
	to prevent the product from
moving when you operate the controls. These	,
	, feet are made from non-

migrating rubber material specially formulated to avoid leaving any marks or

stains on your furniture. However certain types of oil based furniture polishes,

,

wood preservatives, or cleaning sprays may cause the rubber , feet to soften,

and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt

pads, available at hardware stores and home improvement centres everywhere,

,

and apply these pads to the bottom of the rubber , feet before you place the product on fine wooden furniture.

IMPORTANT: Raising And Lowering The Lid

	,	,
To open the lid, raise it as far as it will go until the lid support bracket		locks in
the open position.		,

To close the lid, lift it upward slightly until the lid support bracket ,unlocks , and then gently lower the lid.

TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID

CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT

BRACKET.

7