Emerson NR290TTC owner manual Operating Instructions, Listening To The Radio, Antenna Information

OPERATING INSTRUCTIONS

Listening To The Radio

1.)	To turn the				,
				system ,on , rotate the OFF-VOLUMEcontrol clockwise
	,		,
		click		is heard, and set the Volume to a low level. The POWER
	until a
	indicator lights up.
2.)	Set the Function selector (AM/FM/TAPE/CD/PHONO) to the AM or FM band
	as desired . The dial scale light comes ,on , .
3.)	Rotate the TUNING control to tune the desired radio station. If you tune to a
	strong FM stereo station, the FM ST. Indicator will light and reception will be
	in stereo. If you tune to a weaker FM station, the reception will automatically
	switch to mono.
4.)	Adjust the OFF-VOLUMEcontrol as desired.
5.)	When you are finished				listening turn the OFF-VOLUMEcontrol counter
				,	is heard. The POWER indicator and the tuning dial
	clockwise until a , click
		,	,
	light go		off .

Antenna Information

The AM bar antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the cabinet slightly until the internal antenna is picking up the strongest signal.

PROGRAM	PLAY/PAUSE
REPEAT	STOP
RANDOM	SKIP FWD.
VOLUME	TUNING
OPEN/CLOSE	SKIP REV.
OFF
PHONES

The FM wire antenna is located on the back cabinet. If necessary adjust the position and direction of this antenna until you find the position that provides the best reception.

10