Teac T-H300DAB Power switch, Standby indicator, Display, Remote sensor, SELECT/TUNING Mode knob

APOWER switch

Press this switch to turn the unit on or off (standby).

The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position.

BSTANDBY indicator

This indicator lights when the unit is in the standby mode.

When the unit is turned on, it goes off.

CDisplay

When the unit is on, the current status of the unit is displayed.

DRemote sensor

When operating the remote control unit, point it towards the remote sensor.

ESELECT/TUNING MODE knob

(SELECT and SCROLL on the remote control unit)

To adjust the parameters such as changing stations, turn this knob (or press SCROLL on the remote). Pressing the knob (or SELECT on the remote) selects the displayed station.

Also operates the commands in the function menus. Press once to show signal stength, press again to remove signal strength display.

FMEMORY button

Press this button to store the station. Up to 70 stations (DAB:10, FM:30, AM:30) can be stored in preset memories.

GINFO/RDS button

In DAB mode, this button is used to change the text content on the second line of the display, to show DLS (Dynamic Label Segment, info text supplied by each radio station), Programme type (classification given by the radio sation ie: Pop music or Rock), Multiplex name (name of multiplex broadcaster), Time & date, Bitrate, or Channel and frequency.

In FM mode, this button is used to select the RDS mode.

HFUNCTION/FM MODE button

In DAB mode, activates features such as station order, manual tune, DRC value, SW version indication, signal error rate. It is also possible to ‘tidy’ the station list to remove stations which are in the memory but have no service provided.

In FM mode, pressing this button alternates between stereo mode and mono mode.

IAUTO TUNING button

Press this button to activate auto location of all available DAB services.

Press once for UK services or, hold for longer than 2 seconds to activate international search.

JBAND button

Press this button to select the band (FM, AM or DAB).

KDIMMER button

This button is used to dim the display.

LSLEEP button

Use this buton to set the sleep timer.

MNumeric buttons

Use these buttons (0–9) to select the desired preset channel.

9