Teac T-H300DAB owner manual Contents, IMPORTANTfor U.K.Customers

IMPORTANT(for U.K.Customers)

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below:

IMPORTANT. DO NOT make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured GREEN or GREEN-and-YELLOW.

The wires in the mains lead on this product are coloured in accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover.

IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN.

CAUTION

The product shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on the product.

Do not install this equipment in a confined space such as a book case or similar unit.

Contents

Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit.

Important (for U.K. Custmers)	. 2
Before Use	. 3
Remote Control Unit	. 3
Connection	. 4
Connecting Antennas	. 6
Names of Each Control	. 8
About Digital Audio Broadcasts	10
Setting up your DAB Tuner	10
Using the Channel List	11
Using Function Control
Station order	12
Sig error rate	13
Preset tune	13
Sw version	14
DRC value	14
Manual tune	15
Auto Tuning	15
Changing Display Settings	16
Listening to FM/AM	17
Presetting	18
RDS	19
PTY Search	20
PTY Programmes	21
Factory Reset	21
Sleep Timer	22
Specifications	22
Troubleshooting	23

This symbol means that the product is double insulated and you do not need an earth connection

This symbol means that this product keeps to the European safety and electrical interference directives

2