CAUTION
Turn off the power of all the equipment before making connections.
Read instructions of each component you intend to use with this unit.
<Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord.
AAUDIO OUT jack
Analogue
Connect the component with RCA pin cable.
AUDIO OUT
Make sure to connect :
white plug w white jack (L: left)
red plug w red jack (R: right)
BDIGITAL OUT terminal
DAB’s digital audio signal is output from this terminal. If you want to record digitally, or decode the signal using an external digital decoder, connect the component with an optical cable.
DIGITAL OUT (T-H300DAB)
w DIGITAL IN (decoder,
CPower cord (AC)
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
Hold the power plug when plugging or unplugging the power cord.
DREMOTE CONTROL jack
If you have TEAC Reference 300 series, Convenient sysytem control operations are possible.
<By pressing the POWER STANDBY button of the Reference 300 series Amplifier/Receiver, you can switch ON/standby all the unit connected with remote control cord.
<When you press the PLAY button of the source, the INPUT SELECTOR of the Reference 300 series Amplifier/Receiver will be set to the source automatically.
<The source you select by the INPUT SELECTOR of the Reference 300 series Amplifier/Receiver will start playback automatically.
<When you turn ON the system, the source that was selected last time will start playback automatically.
<You can use the system remote control unit to operate all the unit connected with remote control cords.
Connect the remote control jack (A or B) of each component with remote control cords.
5
