Teac T-H300DAB owner manual Listening to FM/AM, FUNCTION/FM Mode Button

Listening to FM/AM

BAND SELECT/TUNING MODE

1Select AM or FM by pressing the BAND button.

2Select the desired tuning mode by pressing the SELECT/TUNING MODE knob.

Manual tune Auto tune

Preset tune

3Select the station you want to listen to. (Follow the instructions on the right in A through C .)

<“STEREO” is displayed when a stereo broadcast is tuned in.

AManual tuning mode

Turn the SELECT/TUNING MODE knob repeatedly until the station you want to listen to is found.

The frequency changes by a fixed step.

FM: 50 kHz steps / AM: 9 kHz steps

BAuto tuning mode

Turn the SELECT/TUNING MODE knob slightly to begin auto tuning.

When a station is found, the tuning process stops automatically.

Turn the SELECT/TUNING MODE knob again to stop the auto tuning.

CPreset tuning mode

Press a preset number on the remote control unit.

To select a station with a one-digit preset number press 0 then the number. For example, if you want to tune in preset number 2, press 0 then 2.

Preset stations can also be selected by the SELECT/TUNING MODE knob. Turn the SELECT/ TUNING MODE knob repeatedly until the desired preset station is found.

FUNCTION/FM MODE Button

Pressing this button switches between Stereo mode and Mono mode.

Stereo

FM stereo broadcasts are received in stereo and the STEREO appears on the display.

Mono

To compensate for weak FM stereo reception, select this mode. Reception will now be monaural, reducing unwanted noise.

17