Emerson PD5812 owner manual To SET/RECALL the Radio Presets 10AM/10FM, Auto Preset Function

TO SET/RECALL THE RADIO PRESETS (10AM/10FM)

1

1

2

2
2	3	1

3

Press the POWER button 1 to turn the unit on. Press the FUNCTION button 2 to select the Radio mode.

Press the BAND button 1 to select AM or FM.

Use the SKIP/TUNING n 2 or SKIP/TUNING o 3 button to select the desired AM or FM station.

Press the PROG/MEMORY button; “MEM” will blink in the display and a preset number will appear.

4

5

6

2

1

Select the desired preset number (up to 10 each band) by repeatedly pressing the P. MODE/MEM UP button.

Press the PROG/MEMORY button again to set the preset. Repeat steps 2 through 4 to set more presets (up to 10 each band).

For an enhanced Bass sound, press the BBS button 1. Adjust the VOLUME control 2 as desired.

NOTE: The radio memories will be kept for 10 seconds if the AC cord is unplugged and no batteries are inserted.

AUTO PRESET Function

This model includes an Auto-Preset feature which you can use to automatically enter 10 strong FM and AM stations in the tuner preset memory.

Note: This feature is useful if you live in a rural area with a limited number of stations. However if you live in a major metropolitan area with many strong stations, do not use the Auto-Preset feature. It will memorize the first 10 strong stations it encounters and these will probably not be the same 10 stations that you would select if you were memorizing stations manually.

To use the Auto-Preset feature, turn the unit 'On', select the Tuner function and the desired band. Press and hold the PROG/MEMORY button until the tuner display begins to move, then release the button. The tuner will start searching up the band and it will automatically enter the first 10 strong stations on the selected band in the 10 preset memories. The display will indicate which station is being entered in each of the 10 memories.

After the Auto-Preset feature memorizes 10 stations, the tuner returns to preset memory number 1.

7