6.) Press the PLAY/PAUSE button. The play indicator and playback begins on track 1.

0t

To skip to lower or higher numbered tracks during playback press the >H or l( button repeatedly until the desired track number appears in the display. Playback will begin on the selected track.

'To search rapidly forward or backward during playback to locate a specific

portion of a track, depress and hold the >l or l( bufton. The playerwillsearch

rapidly forward or backward as long as the buttons are depressed. The volume isautomatically reduced during high speed music search. Normal

speed playback will resume when the buttons are released.

. To Pause momentarily during playback press the PLAY/PAUSE button again.

The sound stops and the play indicator ) flashes but the disc continues to spin. To cancel Pause and resume normal playback at the same point, press the PLAY/PAUSE button once more.

7.) Adjust the VOLUME and BASS controls as desired.

8.) To Stop playback at any time press the STOP bufton. The disc stops and the

display again show the total numbet of tracks on the disc. After the last track has played the player stops automatically and the display will shows the total number of tracks.

9.) Open the CD door, remove your disc, and close the door again.

10.) Press the POWER button to turn the system 'Off'.

IMPORTANT:

Remember that the CD. You must press when operating the

power does not shut off automatically at the end of a the POWER button to shut the system,Off ',especially system on battery power.

To Start Playback From A Specific Track

lnsert your disc in the player, close the door, and wait until the total number of tracks appear on the display. Press either the ]<< or )X button until the desired track number is flashing in the display, and then press the PLAY/PAUSE button

within 5 seconds to begin playback on the desired track.

13

Page 14
Image 14
Emerson PD9127 owner manual To Start Playback From a Specific Track