Listening To The Radio
Tuner lnformation
This system features a normalAMiFM analog tuning system. Unlike a digitaltuner
it does not automatically lock in on the exact frequency of a station. However
instead of a dial scale and a moving dial pointerwe have included a digitalfrequency display to help you tune more accurately.
Do not be concerned if you cannot easily tune the display to the exact frequency of your favorite stations, especially on the AM band. Slowly rotate the TUNING control until the display approaches the frequency of the desired station and stop when get the strongest, noise free reception - even if the display is not indicating the
exact frequency of desired station.
1)Stide the FUNCTION (AUXiCD/TAPEiRADIO) Selector to Radio position.
2.) Slide the BAND Selector to the desired band ( FM ST/FM/AM) 3.) Press the POWER button to turn the system 'On '.The
LED Power indicator a nd the main display backlighting come on . Depending on the band you selected either an AM or a FM frequency will appear in the display. lf
you selected the FM ST or FM bands, extend the
telescoping FM antenna to its full length.
4.) Rotate the TUNING knob to tune to the desired station.
It is not necessary to adjust the display to the exact
the strongest signal, even if the frequency on thedisplaydoesnotexactly match the frequency of your station.
NOTE: lf you selected the FM ST band and you have tuned to a FM Stereo station the FM ST indicator will light. lf FM Stereo reception is noisy or weak you may be able bo improve it by switching the BAND selector to the FM position, but the sound will no longer be in stereo.
5.) Adjust the VOLUME controlto the desired setting.
6.) Press the BASS button to increase the Bass response. Press again to return to normal Bass response.
10
