Playi n g'Cassette Tapes

1.) Open the cmsette door by pressing the I AStop/Eject key.

2.) Place a pre-recorded cassette tape withtheexposedtapefacing up andthe

full reel on the right side.

3.) set the FUNGTION selector to the TAPE position and press the powER

button to turn the system on. The Power LED indicator comes on but the main

display remains off.

4.) Press the cassette < Play key to begin playback.

5.) Set the VOLUME and BASS controls as desired.

6.) To advance the tape rapidly press the << F.Fwd key. To stop the tape before it

ends press the lAStop/Eject key.

7.) To rewind the tape rapidly press the D Rewind key. To stop the tape before it

ends press the lAStop/Eject key.

8.) when the tape ends the Automatic stop system releases the < play key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired.

9.) when you are finished listening stop the tape, open the door, remove the tape

and close the door.

lf you are playing a tape and then switch to the RADIO or AUXGD function

be sure to press the I Astop/Eject key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism.

17

Page 18
Image 18
Emerson PD9127 owner manual Playi n gCassette Tapes, Display remains off, Set the Volume and Bass controls as desired