SMV300 O/M.QXD 6/21/01 7:46 AM Page 15
ON/OFF TIMER
This feature will allow you to set the unit to turn on and off automatically at preset times.
1 |
2 |
3 |
2 |
1 |
Press the POWER button; the button color will change from red to green which means the unit is on.
Select a radio station or a CD that you would like to be playing when the unit switches on.
If selecting CD, you can also program tracks into memory to be played.
Press the REMAIN/MODE button
❶repeatedly until, “TIMER ON” appears in the display, then immediately press the PROG/ MEMORY button ❷ and the hours will blink.
4 |
|
1 | 1 |
| 2 |
5 |
|
1 | 1 |
| 2 |
6 |
2 |
1 |
Set the correct hour (and AM/PM) using the TUNING/SKIP/ SEARCH (
) or (
) button ❶. When finished setting the hour, press the PROG/MEMORY button ❷ on the remote again and the minutes will blink.
Set the correct minute using the TUNING/SKIP/SEARCH (
) or (
) button ❶.
When finished setting the hour, press the PROG/MEMORY button ❷ and the clock will be set.
Press the REMAIN/MODE button
❶again until, “TIMER OFF” appears in the display, then immediately press the PROG/ MEMORY button ❷ and the hours will blink.
7 |
|
1 | 1 |
| 2 |
8 |
9 |
Set the hour and minute the same way as you did for the Timer On.
To activate the timer to turn on and off at the preset times, press the TIMER button on the main unit; “TIMER” will appear in the display.
Press the POWER button to turn the unit off and into the Standby mode; the POWER button will light red. When the actual time reaches the Timer On time, the unit will turn on.
NOTES:
•While setting, carry out each step within 5 seconds, otherwise the operation will time out and you will have to start again.
•To cancel the timer, press the TIMER button until “TIMER” disappears from the display.
15
