SMV300 O/M.QXD 6/21/01 7:46 AM Page 6
SETTING THE CLOCK
When the unit is first plugged in, the time display will blink. Set the time as follows:
1 |
2 |
3 |
While the unit is OFF (POWER button will be red), press the PROG/MEMORY button on the remote and the hours will blink.
Set the correct hour (and AM/PM) using the TUNING/SKIP/ SEARCH (
) or (
) button.
When finished setting the hour, press the PROG/MEMORY button on the remote again and the minutes will blink.
4 |
5 |
Set the correct minute using the TUNING/SKIP/SEARCH (
) or (
) button.
When finished setting the hour, press the PROG/MEMORY and the clock will be set.
NOTE:
If the time display is blinking, then the clock needs to be set.
EQ (PRESET EQUALIZER) Buttons:
This unit has 4 preset equalizer settings that automatically adjust the sound levels for the desired genre. Press the EQ button for your listening preference (FLAT, ROCK, CLASSIC and POP); the respective indicator will light in the display.
MUTE |
1 |
2 |
1 |
To temporarily mute the sound, press the MUTE button ❶; "MUTE" will appear in the display and the sound will be muted. Press the MUTE button ❶ again or one of the VOLUME buttons ❷ to restore the sound.
6
