SMV300 O/M.QXD 6/21/01 7:46 AM Page 7
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1 |
2 |
1 |
2 |
3 |
Press the POWER button; the button color will change from red to green which means the unit is on.
Press the AM/FM Function button ❶ to select the radio. Press the AM/FM button again to select AM or FM.
If listening to FM, press the FM STEREO button ❷ to select MONO or STEREO. Noise present in FM can be reduced by setting this to MONO.
Select a station using the TUNING/SKIP/SEARCH (
) or (
) button.
If you press and hold the TUNING/ SKIP/SEARCH (
) or ( 
) button for 2 seconds, the unit will automatically scan to the next broadcasting station.
4 |
|
|
| 1 | 1 |
2 |
| |
|
|
5 |
Adjust the VOLUME ❶ and Preset Equalizer ❷ buttons as desired.
When you have finished listening, press the POWER button; the button color will change from green to red which means the unit is in the Standby mode.
Hints for Better Reception
FM - Make sure that the FM Antenna Wire is extended to its full length. You may have to vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.
7
