Quick Installation Guide
Rosemount 2051
STEP 5: VERIFY CONFIGURATION
NOTE:
A check (P) indicates the basic configuration parameters. At minimum, these parameters should be verified as part of the configuration and startup procedure.
Table 1. Field Communicator Fast Key Sequence |
|
| |||
| Function | ||||
| Alarm and Saturation Levels | 1, 4, 2, 7 | N/A |
| |
|
|
| 1, 4, 3, 2, 4 | ||
| Analog Output Alarm Type | 1, 4, 3, 2, 4 | |||
| Burst Mode Control | 1, 4, 3, 3, 3 | 1, 4, 3, 3, 3 | ||
|
|
| 1, 4, 3, 3, 4 | ||
| Burst Operation | 1, 4, 3, 3, 4 | |||
| Custom Meter Configuration | 1, 3, 7, 2 | N/A |
| |
|
|
| N/A |
| |
| Custom Meter Value | 1, 4, 3, 4, 3 |
| ||
| Damping | 1, 3, | 6 | 1, 3, | 6 |
|
|
| 1, 3, 4, 1 | ||
| Date | 1, 3, 4, 1 | |||
| Descriptor | 1, 3, 4, 2 | 1, 3, 4, 2 | ||
|
|
| 1, 2, 3, 2, 1 | ||
| Digital To Analog Trim | 1, 2, 3, 2, 1 | |||
| Disable Local Span/Zero Adjustment | 1, 4, 4, 1, 7 | 1, 4, 4, 1, 7 | ||
|
|
| 1, 4, 4, 1 | ||
| Field Device Information | 1, 4, 4, 1 | |||
| Full Trim | 1, 2, 3, 3 | 1, 2, 3, 3 | ||
|
|
| 1, 2, 3, 1, 1 | ||
| Keypad Input – Rerange | 1, 2, 3, 1, 1 | |||
| Local Zero and Span Control | 1, 4, 4, 1, 7 | 1, 4, 4, 1, 7 | ||
|
|
| 1, 2, 2 | ||
| Loop Test | 1, 2, 2 | |||
| Lower Sensor Trim | 1, 2, 3, 3, 2 | 1, 2, 3, 3, 2 | ||
|
|
| 1, 3, 4, 3 | ||
| Message | 1, 3, 4, 3 | |||
| Meter Options | 1, 4, 3, 4 | N/A |
| |
|
|
| 1, 4, 3, 3, 2 | ||
| Number of Requested Preambles | 1, 4, 3, 3, 2 | |||
| Poll Address | 1, 4, 3, 3, 1 | 1, 4, 3, 3, 1 | ||
|
|
| Left Arrow, 4, 1, 1 | ||
| Poll a Multidropped Transmitter | Left Arrow, 4, 1, 1 | |||
| Range Values | 1, 3, 3 | 1, 3, 3 | ||
|
|
| 1, 2, 3, 1 | ||
| Rerange | 1, 2, 3, 1 | |||
| Scaled D/A Trim | 1, 2, 3, 2, 2 | 1, 2, 3, 2, 2 | ||
|
|
| 1, 2, 1, 1 | ||
| Self Test (Transmitter) | 1, 2, 1, 1 | |||
| Sensor Info | 1, 4, 4, 2 | 1, 4, 4, 2 | ||
|
|
| 1, 1, 4 | ||
| Sensor Temperature | 1, 1, 4 | |||
| Sensor Trim Points | 1, 2, 3, 3, 4 | 1, 2, 3, 3, 4 | ||
|
|
| 1, 2, 1, 2 | ||
| Status | 1, 2, 1, 2 | |||
| Tag | 1, 3, 1 | 1, 3, 1 | ||
|
|
| 1, 3, 5 | ||
Transfer Function (Setting Output Type) | 1, 3, 5 | ||||
| Transmitter Security (Write Protect) | 1, 3, 4, 4 | 1, 3, 4, 4 | ||
|
|
| 1, 2, 3, 2 | ||
| Trim Analog Output | 1, 2, 3, 2 | |||
| Units (Process Variable) | 1, 3, 2 | 1, 3, 2 | ||
|
|
| 1, 2, 3, 3, 3 | ||
| Upper Sensor Trim | 1, 2, 3, 3, 3 | |||
| Zero Trim | 1, 2, 3, 3, 1 | 1, 2, 3, 3, 1 | ||
12
