Mount the Transmitter, Flow | Emerson Process Management 2051

00825-0100-4101, Rev EA June 2010

Rosemount 2051

STEP 1: MOUNT THE TRANSMITTER

1.Place taps to the side of the line.

2.Mount beside or below the taps.

3.Mount the transmitter so that the drain/vent valves are oriented upward.

Gas Flow Applications

1.Place taps in the top or side of the line.

2.Mount beside or above the taps.

1.Place taps to the side of the line.

2.Mount beside or below the taps.

3.Fill impulse lines with water.

Image 3

Contents

Rosemount 2051CF Series Flowmeter Transmitter Quick Installation Guide Conduit/Cable Entries Explosions could result in death or serious injuryProcess leaks may cause harm or result in death Electrical shock can result in death or serious injury Mount the Transmitter ApplicationsFlow Optional Mounting Brackets Common Transmitter Assemblies Bolting Considerations Ptfe Based Rings with Flange AdaptersFlange Adapter Ring Consider Housing Rotation Inline Gage Transmitter OrientationSET the Jumpers MA Hart RL ≥ 250Ω Connect the Wiring and Power Wiring Power Supply for 1-5 Vdc Hart Low Power Power Supply for 4-20 mA Hart Function MA Hart Verify Configuration Zero Trim Using the Field CommunicatorUsing the Transmitter Zero Adjustment Buttons Trim the Transmitter Safety Instrumented Systems InstallationConfiguration Reference Operation and Maintenance European Directive Information Safety Failure ValuesProduct Certifications Approved Manufacturing Locations European Certifications Hart ProtocolHazardous Locations Certifications North American Certifications Rosemount IECEx Certifications Tiis Certifications Inmetro CertificationsCCoE Certifications E5 and I5 combination Combinations of CertificationsE1, I1, N1, and ND combination E4 and I4 combination Rosemount Rosemount Rosemount