Emerson Process Management D5092 manual Features Current Workstation Only, Alarm Text

Reference Guide

D5092

11-Dec-2007 - Page 24

Alarm Printer View

1.3.5.7.1Features

1.3.5.7.1.1Current Workstation Only

If checked, alarms and events will be filtered on whether they originated from the current Workstation.

1.3.5.7.1.2Workstation

If a remote Workstation is named here, alarms and events will be filtered on whether they originated from that remote Workstation. This field can accept wild-cards, and therefore if Workstations have been named generically (ie OpRoom1, OpRoom2 etc.), the filter could apply to more than one remote Workstation.

1.3.5.7.1.3Alarm Text

Any text type here will be used as a filter on the Alarm Text of any alarm or event. The field can be used with wild-cards.

1.3.5.7.1.4Using Wildcards

When using the Filter Property pages several filter settings allow wildcard characters to be specified. The wildcard characters are the * (asterisk) and ? (question mark) characters.

The '*' signifies a match with zero or more characters. Note: any characters specified after an asterisk are ignored.

The '?' signifies a match with exactly one character.

A few examples:

Wilcard Use		Explanation
Digital*		Matches with Digital Alarm, Digital Alarm9, Digital, etc.
Real?	Matches with Real1, RealX, but does not match Real.
Analog*15		Matches with Analog Alarm386, Analog15 etc. (remember that the 15 after the
		asterisk will be ignored).

Remote Automation Solutions

Website: www.EmersonProcess.com/Remote