THE INFRARED TRANSMITTER
STANDARD HAND HELD TRANSMITTER: Small, light and practically de- signed, the hand held transmitter takes 2 AAA batteries that can be easily fitted by removing the sliding lid on the underside of the transmitter. Please pay attention to the polarity and correct orientation of the batteries during fitting.
When using the infrared handheld transmitter, always point the transmitter head directly at the receiver. Use the On/Send button to transmit settings to
the microprocessor. At the time of transmission the 
symbol will display and an audible buzzer will sound if the signal has been correctly received. After changing any of the settings in the transmitter’s LCD display, the new settings must be transmitted to the unit using the On/Send button before the changes will take effect.
DISPLAY INDICATORS
TRANSMIT INDICATOR Flashes when system settings are transmitted.
MODE INDICATOR
Highlights Mode of Operation.
FAN MODE INDICATOR
Highlights Fan Speed.
ON/SEND
Press this button to switch the unit on and transmit the system settings. The unit will confirm receipt of the adjustment by producing a short audible tone.
SELECTOR BUTTONS
MODE OF OPERATION
Selects the mode options: Heat, Cool, Auto Heat/ Cool, Dry Coooling, and Fan Only.
FAN
Selects fan speed options: Low, Medium, High, and Auto.
CLK/TIMER +/-
Selects and adjusts the clock or weekly pro- gram Stop/Start times.
TEMP +/-
CLOCK/TIMER DISPLAY Shows current day, time,
or weekly program Stop/Start times.
SETPOINT DISPLAY Indicated temperature setpoint.
SWING INDICATOR Indicates operation of the motorized air vanes (where fitted).
SLEEP INDICATOR
Indicates when
Sleep mode is selected.
Adjusts temperature setpoint in intervals of 1ºF beftween 58 - 90ºF.
SLEEP
Selects/Deselects sleep mode. Using the On/ Send button, the temperature setpoint will set back 2ºF after 1 hour, 4ºF after 2 hours.
SWING
Causes the motorized air vanes to oscillate when selected (not applicable to all models).
OFF
Switches the unit off (in certain instances the fan may be subject to a 2 minute run on time to dissipate residual heat).
ENVIROMASTER INTERNATIONAL LLC | 11 | EMI@ENVIROMASTER.COM |
