Connection Diagrams

Connecting a 7.1 Preamp/Processor

Connection using a 7 channel preout to LPA-1

For details on connecting the speakers to the 5 way binding

posts, please see Page 18

When connecting the LPA-1 to drive a 7.1 system, you can use channels 1-5 for the “Main” speakers as you wish, but Emotiva recommends using channels 6 and 7 as the “Rear Back” surround channels so that the power is distributed correctly in the room. This will yield the best results from the front L/C/R speakers and the main surround channels.

Page 13

Page 13
Image 13
Emotiva manual Connection Diagrams, Connecting a 7.1 Preamp/Processor, Connection using a 7 channel preout to LPA-1