Safety Precautions
Read this User’s Guide thoroughly before attempting to install and configure the Emotiva LPA-
1 Amplifier. All the safety and operation instructions should be read before any operation of the component(s) begin. After successful installation and configuration of the Emotiva LPA-1 Amplifier, be sure to retain this manual in a safe place for any future reference needs.
All warnings on the Emotiva LPA-1 Amplifier and in these operating instructions should be followed. Safety is a key component to a long lasting and trouble free installation. The vast majority of the subsequent safety precautions involve simple common sense. If you are not comfortable with the installation of audio/video entertainment equipment, it will be to your benefit to seek the services of a qualified installation professional.
NEVER use the LPA-1 Amplifier near water such as a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. There is a risk of electric shock to your body and permanent damage to the equipment. Electric shock may result in permanent bodily injury or death.
The Emotiva LPA-1 Amplifier should be situated so that its location or installation position does not interfere with proper ventilation. The Emotiva LPA-1 Amplifier should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air circulation. The Emotiva LPA-1 Amplifier should be situated away from heat sources such as radiators, or any other devices which produce heat.
The Emotiva LPA-1 Amplifier should be connected to a power supply only of the type described in this User’s Guide and what is labeled on the LPA-1 component. Power supply cords should be routed so that they are not in high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords at the wall plugs, convenience receptacles, and the point where they connect into the LPA-1 Amplifier. The power cord of the LPA-1 Amplifier should be unplugged from the outlet when unused for a long period of time. When it’s time for cleaning the Emotiva LPA-1 Amplifier, it should be cleaned only as recommended in this User’s Guide. Never spray liquids directly into the component’s vent openings. Care should be taken so that small objects do not fall into the inside of the LPA-1 Amplifier.
The following situations require your Emotiva LPA-1 Amplifier is serviced only by qualified service personnel:
1.The power-supply cord or the plug has been damaged; or
2.Objects have fallen, or liquid has spilled into the component; or
3.The LPA-1 has been exposed to rain; or
4.The LPA-1 does not appear to operate normally or exhibits a marked change in performance; or
5.The LPA-1 has been dropped, or its enclosure or chassis is damaged.
Page 4
