Empire Products BF-30-2, BF-20-2, BF-10-2 installation instructions Unvented Room Heater

INSTALLATION INSTRUCTIONS

AND

OWNER'S MANUAL

Installer: Please leave these instructions with the consumer.

Consumer: Please retain these instructions for future use.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

—WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach yourgas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

UNVENTED

ROOM HEATER

MODELS

BF-10-2 BF-20-2 BF-30-2

EFFECTIVE DATE

MAY 2004

This appliance may be installed in an after- market, permanently located, manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appli- ance is not convertible for use with other gases.

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ven- tilation air must be provided. Refer to page 6.

WARNING: If not installed, operated and maintained in accordance with the manufacturer'sinstructions,thisproductcould expose you to substances in fuel or from fuel combustion which can cause death or serious illness.

WATER VAPOR: A BY-PRODUCT OF UNVENTED ROOM HEATERS

Watervaporis a by-product of gas combustion. An unvented room heater produces approximately one (1) ounce (30ml) of water for every 1,000 BTU's (.3KW's) of gas input per hour. Refer to page 6.

16012-1-0504 Page 1