LIGHTING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch;

do not use any phone in your building.

•Immediately call yourgas supplierfrom a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don't try to repair it; call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

 

 

LIGHTING INSTRUCTIONS

 

1.

STOP! Read the safety information above.

7.

Find pilot - follow metal tube

2.

Set the thermostat to lowest setting.

 

from gas control. The pilot is mounted

 

on front of main burner.

 

 

 

 

3.

Turn off all electric power to the appliance (if appli-

8.

Turn gas control

knob coun-

 

cable).

 

 

 

 

terclockwise

to "PILOT."

 

 

 

 

4.

Remove control access panel (control door).

9.

Push in control knob all the

5.

Push in gas control knob slightly and turn

 

way and hold in. Immediately light the pilot with a

 

clockwise

to "OFF."

 

match. Continue to hold the control knob in for about

 

 

 

 

one (1) minute after the pilot is lit. Release knob and

 

it will pop back up. Pilot should remain lit. If it goes

 

out, repeat steps 5 through 9.

 

• If knob does not pop up when released, stop and

 

immediately call a qualified service technician or

 

gas supplier.

 

• If the pilot will not stay lit after several tries,

 

turn the gas control knob to "OFF" and call your

GAS CONTROL KNOB SHOWN IN "OFF" POSITION

service technician or gas supplier.

 

NOTE: Knob cannot be turned from "PILOT" to "OFF" unless knob is pushed in slightly. Do not force.

6. Wait ten (10) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you don't smell gas, go to the next step.

10.

Turn gas control knob counterclockwise

to

 

"ON."

 

11.

R e p l a c e c o n t ro l a c c e s s p a n e l

( c o n t ro l

 

door).

 

12.Turn on all electric power to the appliance (if applicable).

13.Set thermostat to desired setting.

TO TURN OFF GAS TO APPLIANCE

1.Set the thermostat to lowest setting.

2.Turn off all electric power (if applicable) to appliance if service is to be performed.

3.Remove control access panel (control door).

4.Push in gas control knob slightly and turn clockwise to "OFF." Do not force.

5.Replace control access panel (control door).

Page 12

12425-7-0406

Page 11 Page 13
Page 12
Image 12
Empire Products GWT-35-2, RB) Lighting Instructions, What to do if YOU Smell GAS, Service technician or gas supplier
Page 11 Page 13

GWT-35-2, RB), GWT-25-2 specifications

Empire Products is renowned for its commitment to quality and innovation, particularly in the realm of heating solutions. Among their extensive range, the GWT-35-2 and GWT-25-2 gas-fired wall heaters stand out as exceptional choices for both residential and commercial applications.

The Empire GWT-35-2 is designed to deliver a powerful heating solution, boasting an impressive heat output. With an efficiency rating that ensures optimal warmth while minimizing energy consumption, this model is perfect for larger spaces that require consistent and reliable heating. Its sleek design allows it to seamlessly blend into various room aesthetics, while the multiple installation options make it versatile enough to meet varying layouts and preferences.

On the other hand, the GWT-25-2 is tailored for slightly smaller areas, yet it does not compromise on performance. This model provides ample heating efficiency and is well-suited for those looking to maintain a cozy atmosphere in modest-sized rooms. The unit’s compact form factor allows for easy installation without occupying too much wall space, making it an ideal option for residential settings.

Both models utilize advanced technologies that contribute to their superior performance. The state-of-the-art electronic ignition system in the GWT series ensures reliable startups, while the built-in thermostat provides precise temperature control. Users can easily adjust settings to their comfort levels, enhancing overall user satisfaction. Additionally, the heaters are equipped with innovative safety features such as automatic shut-off mechanisms, making them a safe choice for any environment.

Another key characteristic of the GWT-35-2 and GWT-25-2 is their fuel efficiency. By utilizing natural gas or propane, these units are designed to reduce energy costs without sacrificing heating quality. The durable construction of both models guarantees longevity and resilience, meaning customers can expect years of dependable service.

In summary, Empire Products' GWT-35-2 and GWT-25-2 wall heaters exemplify cutting-edge heating technology. Their combination of efficiency, performance, and safety features makes them a reliable choice for anyone in need of effective heating solutions, whether in a home or a commercial space. With Empire's commitment to quality, customers can feel confident in their investment in these powerful heating units.
Top Page Image Contents